TA Triumph-Adler LP 210 - Manual (Page 95)

Working with the DOS printer tools 6
Laser Printer 200 Series 6-21
Switching on/off the automatic continuation function
A print job is interrupted if the printer signals a format error or memory
overflow. The “Auto continue“ function enables you to determine whether
the print job should continue automatically after a certain time has elapsed
despite the presence of an error message.
➜ Select “ON“ and enter a time period after which the a print job should
be automatically continued despite the error.
➜ Select “OFF“ to suppress the automatic continuation function.
Specifying the input/output timeout
An input/output timeout occurs when the printer cannot detect the end
data code of a print job sent from the computer. The print job is
automatically cancelled in the case of an input/output timeout.
➜ Enter the number of seconds within which the printer must detect the
end of a print job.