TA Triumph-Adler LP 4140 - Manual (Page 101)

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-73
Paper Handling
You can change the MP tray mode, the paper size and type for each paper
source, the sorter mode, the paper source, and paper destinations.
MP Tray Mode
The MP tray can be used in one of two modes: cassette mode or first
mode. The MP tray can hold approximately 200 sheets of paper (A4 size,
0.11 mm thickness).
Cassette Mode
The cassette mode provides faster printing speed than the first mode.
Approximately 200 sheets of paper can be continuously fed in this mode.
(This is the factory setting.)
First Mode (Automatic Manual Feeding)
The printer automatically feeds any paper placed on the MP tray even if
another paper source is selected. After all paper in the MP tray is printed,
paper will be fed from the paper source originally selected.
1 Press [MENU].
2 Press U or V repeatedly until Paper
Handling > appears.
3 Press
Z.
4 Press U or V repeatedly until >MP Tray
Mode appears.
5 Press [OK]. A blinking question mark (?)
appears.
6 Select First or Cassette using
U or V.
7 Press [OK].
8 Press [MENU]. The message display returns to Ready.
Paper Handling >
>MP Tray Mode
Cassette
>MP Tray Mode
? Cassette