TA Triumph-Adler LP 4140 - Manual (Page 70)

Using the Operation Panel
2-42 ADVANCED OPERATION GUIDE
Making Default Settings
Using the operation panel, you can set the default for the following items.
Default Emulation
The emulation mode for the current interface can be changed.
1 Press [MENU].
2 Press U or V repeatedly until Emulation appears. One of the emulation
names shown below appears, indicating the current emulation.
PCL 6 (default)
KC-GL
KPDL
KPDL (AUTO)
Line Printer
IBM Proprinter
DIABLO 630
EPSON LQ-850
3 Press [OK]. A blinking question mark (?)
appears.
4 Press U or V repeatedly until the desired emulation mode appears.
5 Press [OK].
6 Press [MENU]. The message display returns to Ready.
KPDL (AUTO) Emulation
KPDL is the Kyocera’s implementation of the PostScript language. The
KPDL (AUTO) emulation enables the printer to automatically change the
emulation mode according to the data received when printing.
In addition to KPDL (AUTO) emulation, you can use the operation panel to
set another emulation mode that is used very often. The default setting is
PCL 6.
1 Press [MENU].
2 Press
U or V repeatedly until Emulation
appears.
3 Press [OK]. A blinking question mark (?)
appears.
Emulation
?PCL 6
Emulation
PCL 6
Emulation
?PCL 6