TA Triumph-Adler LP 4140 - Manual (Page 95)

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-67
Printing a List of Data Names
The printer prints a list of all data names (referred to as partitions) stored
in a memory card for reference. (Printing a list is also available for a font
card.) To print a list of data names for the memory card, proceed as
follows.
1 Press [MENU].
2 Press U or V repeatedly until Memory
Card > appears.
3 Press Z.
4 Press U or V repeatedly until >Print
Partition List appears.
5 Press [OK]. A blinking question mark (?)
appears.
6 Press [OK]. Processing appears and the printing of the list starts.
The printout (example above) includes the following information.
Device Name/Number: CARD/A is indicated for the memory card.
Capacity:
The total capacity of the memory card in bytes.
Used Space: The total size of the data stored in the memory
card in bytes.
Free Space: The size of the capacity remaining in the memory
card for storing further data, including the amount
of memory that the printer uses for its system.
Partition Name: The name of the written data assigned
automatically by the printer.
Partition Size: The size of the written data in bytes.
Partition Type: The type of the written data i.e., whether it is host
data (Data) or font data (Font).
When the list of file names (partition list) for the memory card is printed, the
message display returns to Ready.
Memory Card >
>Print
Partition List
>Print
Partition List?
Partition Information
Device Information
PARTITION LIST