TA Triumph-Adler LP 4140 - Manual (Page 111)

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-83
3 Press
Z.
4 Press
U or V repeatedly until >Type
Adjust > appears.
5 Press [OK]. A blinking question mark (?)
appears.
6 Press U or V to display the desired paper type or a definable setting from
among Custom 1 through Custom 8 to be registered.
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
High quality
Custom 1 ( to 8)
NOTE: If you select the paper that is normally used, the paper’s settings
will be changed.
7 When the paper type to be customized is displayed, press [OK].
8 Press Z and proceed to Setting the Paper Weight on the following page.
Setting the Paper Weight
You can set the paper thickness for your custom paper type to be
customized.
1 Display the custom paper type (refer to Creating Custom Paper Type on
page 2-82) and press
Z.
2 Press
U or V repeatedly until >>Paper
Weight appears.
>Type Adjust >
Plain
>Type Adjust
? Plain
>>Paper Weight
Normal 1