TA Triumph-Adler LP 4140 - Manual (Page 49)

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-21
The following is a sample status page. The numbers below refer to the
contents explained on the next page.
When the Network Status is turned on, the Network Interface Status Page
will be printed after the Printer Status. (Refer to page 2-37.)
NOTE: Items and values on the status page may vary depending on the
printer’s firmware version.
1 Software Version
This information shows the firmware version and date of issue of the
printer.
2 Hardware Information
This information shows various printer settings, such as the size and
type of the paper in the paper cassettes.
3 Memory
This shows the amount of total memory installed in the printer, the
amount of currently available memory, and the current status of the
RAM disk. Refer to Setting RAM Disk Size on page 2-71.
4 Page Information
This shows the print resolution, number of copies, and the total page
count.
5 Installed Options
This shows the option(s) installed in the printer.
KIR Test pattern ON
Memory
Installed Options
Network Status Emulation
Toner Gauge
0 100
Interfaces
Hardware Information
Page Information
Error Log
STATUS PAGE
Firmware Version: Released: 1
3
5
7
8
2
4
10
11
9
6