TA Triumph-Adler LP 4140 - Manual (Page 84)

Using the Operation Panel
2-56 ADVANCED OPERATION GUIDE
Carriage-Return (CR) Action
This procedure instructs the printer what to do when it receives a carriage-
return code (character code 0DH).
1 Press [MENU].
2 Press U or V repeatedly until Page Set >
appears.
3 Press
Z.
4 Press U or V repeatedly until >CR Action
appears.
5 Press [OK]. A blinking question mark (?)
appears.
6 Press
U or V repeatedly until desired carriage-return action appears.
CR only A carriage-return is performed. (Default)
CR and LF A carriage-return and linefeed are performed.
Ignore CR The carriage-return code is ignored.
7 When the desired action is displayed, press [OK].
8 Press [MENU]. The message display returns to Ready.
Wide A4 Pitch
Turn this On to increase the maximum number of characters that can be
printed in a line for A4 page (78 characters at 10 pitch) and Letter size page
(80 characters at 10 pitch). This setting is effective only in PCL 6
emulation.
1 Press [MENU].
2 Press U or V repeatedly until Page Set >
appears.
3 Press Z.
4 Press U or V repeatedly until >Wide A4
appears.
Page Set >
>CR Action
CR only
>CR Action
? CR only
Page Set >
>Wide A4
Off