TA Triumph-Adler LP 4140 - Manual (Page 105)

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-77
Paper Size Unit Selection
The paper size unit (metric or inch system) used in the message display
can be selected beforehand. At the time of Ready or when selecting the
size display, the unit for some paper may be replaced with the counterpart
as shown in the following table.
For example, when placing letter size paper in the cassette while mm unit
is selected, A4 will be displayed in the LCD. To correct the display, use the
following procedures.
NOTE: You can set the option paper feeder PF-700 as cassettes 3 and 4
using the same procedures. When using the paper feeder PF-750, you
can set it as cassette 3.
1 Press [MENU].
2 Press U or V repeatedly until Paper
Handling appears.
3 Press Z.
4 Press U or V repeatedly until
>Cassette1 Size> appears.
5 Press Z. >>Unit appears.
6 Press [OK]. A blinking question mark (?)
appears.
Metric Inch
A3 Ledger
B4 Legal
A4 Letter
A4-R Letter-R
B5 Letter-R
B5-R Statement
A5 Statement
Folio Legal
Paper Handling >
>Cassette1 Size>
A4
>>Unit
mm
>>Unit
? mm