TA Triumph-Adler LP 4140 - Manual (Page 96)

Using the Operation Panel
2-68 ADVANCED OPERATION GUIDE
Using USB Flash Memory
The USB flash memory is available for only PDF file. PDF files should be
stored on the root directory of USB flash memory. The PDF file name can
be up to 99 single-byte characters in length.
NOTE: The file name which is displayed on the message display can be
up to 16 characters.
Installing the USB flash memory into the printer allows you to perform the
following operations.
• Printing PDF Data
• Disconnecting a USB Memory Device
• Printing a List of Data Names (partitions)
Printing PDF data
To print data stored in USB memory, proceed as follows.
NOTE: Only PDF data stored in a USB memory root folder is printable.
1 Press [MENU].
2 Press U or V repeatedly until USB
Memory > appears.
3 Press Z.
4 Press U or V repeatedly until >Read Data
appears. The name of the PDF data also
appears.
5 Press [OK]. A blinking question mark (?)
appears in front of the name of the PDF
data.
6 Press U or V to display the name of the PDF data to be printed.
7 Press [OK]. Processing appears, and the selected PDF data is printed.
After the selected PDF data is printed, the message display returns to
Ready
.
USB Memory >
>Read Data
00:ABC.pdf
>Read Data
?00:ABC.pdf