TA Triumph-Adler LP 4140 - Manual (Page 79)

Using the Operation Panel
ADVANCED OPERATION GUIDE 2-51
Pagination
In Page Set menus, you can set the number of copies, the page
orientation, and other settings regarding pagination.
Number of Copies
You can set the number of copies of each page to be printed for the current
interface. The number of copies can be set between 1 and 999. The
number of copies can be set whenever the message display indicates
Ready
.
1 Press [MENU].
2 Press U or V repeatedly until Page Set >
appears.
3 Press Z.
4 Press U or V repeatedly until >Copies
appears.
5 Press [OK]. A blinking cursor ( _ ) appears.
6 Press U or V to increase or decrease the value of the figure where the
cursor is blinking. It can be set between 1 and 999. You can use
Z and Y
to move the cursor right and left.
7 When the desired size is displayed, press [OK].
8 Press [MENU]. The message display returns to Ready.
Selecting the Reduced Print
You can print with the reduced size. This menu is used to set the source
paper size and the paper size to use after reduction.
NOTE: Printed results when making reductions differ from equivalent
size printing. Sometimes the line width of characters may not be
consistent or lines may appear in figures or image patterns.
Page Set >
>Copies
001
>Copies
001