TA Triumph-Adler LP 4140 - Manual (Page 120)

Using the Operation Panel
2-92 ADVANCED OPERATION GUIDE
6 Press
U or V to display the desired mode. The display changes as shown
below.
Off (default)
Permanent
Perm / Temp (Permanent/Temporary)
7 When the desired mode is displayed, press [OK].
8 Press [MENU]. The message display returns to Ready.
Alarm (Buzzer) Setting
In addition to the message displayed when the paper supply is exhausted,
or when paper jamming occurs, an audio warning is made to sound
according to the status. This is useful, for example, when the printer is in a
location some distance from the user.
The audio alarms are each set to On as a factory preset. If the alarms are
set to Off, they will not sound.
1 Press [MENU].
2 Press U or V repeatedly until Others >
appears.
3 Press Z.
4 Press U or V repeatedly until >Buzzer >
appears.
5 Press Z.
6 Setting items (e.g., Error) are displayed in
the message display. Press
U or V to
display each setting item.
Error
Ready
Job End
Key Confirm.
7 Display the setting item to be changed and
press [OK]. A blinking question mark (?)
appears.
8 During setting, press U or V to select on/off for the audio alarm.
Others >
>Buzzer >
>Error
On
>Error
? On