TA Triumph-Adler LP 4140 - Manual (Page 102)

Using the Operation Panel
2-74 ADVANCED OPERATION GUIDE
Setting the MP Tray Size
When using the MP tray in the cassette mode, you should set the MP tray
size to the paper size that is used to format the job to print. If they do not
match, printing will not be made on the correct size paper when automatic
paper size selection is made by the application (printer driver). The factory
setting is A4 or Letter size.
For more details about the paper sizes that can be fed from the MP tray,
refer to Chapter 1 Handling Paper.
1 Press [MENU].
2 Press U or V repeatedly until Paper
Handling > appears.
3 Press Z.
4 Press U or V repeatedly until >MP Tray
Size appears.
5 Press [OK]. A blinking question mark (?)
appears.
6 Press U or V to display the desired MP tray size. The display changes as
shown below.
A4
Executive
Letter-R
Letter
Legal
Ledger
A3
B4
Custom
Envelope C4
Oficio II
Statement
Folio
Youkei 2
Youkei 4
8K
16K
Hagaki
OufukuHagaki
Env. Monarch
Envelope #10
Envelope #9
Paper Handling >
>MP Tray Size
A4
>MP Tray Size
? A4