TA Triumph-Adler P-3020 MFP - Manual (Page 222)

8-16
Default Setting (System Menu)
Media Type Set
Useable paper types can be set on the machine for printing. In addition to pre-selected paper, custom paper can be
selected and the weight can be defined. A paper type can be defined from the operation panel. Useable paper types
and factory-set paper weights are shown below. A paper weight and print density can be changed as needed.
IMPORTANT: When a paper weight is changed, toner fusing problems may cause flaws in the printed image.
For Custom 1-8, settings for duplex printing and media type name can be changed.
Paper Type
Paper source
Default display in the
operation panel
Duplex path
MP tray
Paper
Cassette
Paper Weight
Plain Yes Yes Normal2 Yes
Transparency Yes No Extra Heavy No
Preprinted Yes Yes Normal2 Yes
Labels Yes No Heavy1 No
Bond Yes Yes Normal3 Yes
Recycled Yes Yes Normal2 Yes
Vellum Yes No Light No
Rough Yes Yes Normal3 Yes
Letterhead Yes Yes Normal3 No
Color Yes Yes Normal3 Yes
Prepunched Yes Yes Normal2 Yes
Envelope Yes No Heavy3 No
Cardstock Yes No Heavy3 No
Thick Yes No Heavy3 No
High quality Yes Yes Normal2 Yes
Custom 1 (to 8)*
* This is a paper type defined and registered by the user. Up to eight types of user settings may
be defined. User can also enable or disable the duplex path when using Custom.
Yes Yes Normal2 Yes
Yes: Can be stored No: Cannot be stored
Item Description
Duplex Prohibit Duplex printing not allowed.
Permit Duplex printing allowed.
Name Change names for Custom 1-8. Names
should be not more than 16 characters.
Selecting media type at multi purpose tray,
the name after change will be displayed.