TA Triumph-Adler P-3020 MFP - Manual (Page 245)

8
8-39
Default Setting (System Menu)
Sleep Timer
The time until the machine enters sleep mode can be set.
Use the procedure below to set the Sleep Timer. The default setting is 1 minute.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Timer Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the  or  key to select [Sleep Timer].
Value
For Europe
30 ppm model: 1 to 60 minutes (1minute increments)
35 ppm model: 1 to 120 minutes (1minute increments)
Except for Europe
1 to 240 minutes (1minute increments)
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Auto Panel Reset