Lan interface – TA Triumph-Adler P-3020 MFP User Manual
Page 375
8
8-169
Default Setting (System Menu)
LAN Interface
Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
1
In the Sys. Menu/Count. menu, press the or key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2
The System/Network menu appears.
3
Press the or key to select [Optional Network].
4
Press the OK key. The Optional Network screen
appears.
5
Press the or key to select [Basic].
6
Press the OK key. The Basic menu screen appears.
7
Press the or key to select [LAN Interface].
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]
System/Network:
a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit
]
1 Network Setting
Optional Network:a b
1 Basic
[ Exit
]
Basic:
a b
*********************
2 TCP/IP Settings
3 Bonjour
[ Exit
]
1 Host Name