TA Triumph-Adler P-3020 MFP - Manual (Page 370)

8-164
Default Setting (System Menu)
Optional Network
This selects the settings for the optional network interface kit (IB-50) or wireless network interface kit (IB-51).
NOTE: This is only displayed when a network interface kit (IB-50) or wireless network interface kit (IB-51) is
installed as an option.
Check with your network administrator when selecting the network setting. After all network related settings have
been done, restart the network. Refer to
Restart Network on page 8-170. This is mandatory to make the settings
effective!
When Embedded Web Server RX is used, network parameters and security settings can be conveniently changed
and checked from your PC. For more information, refer to the Embedded Web Server RX User Guide.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [Optional Network].
4 Press the OK key. The Optional Network screen
appears.
TCP/IP Settings
This selects the TCP/IP settings.
The options available in the TCP/IP Settings are as follows:
• TCP/IP …8-166
• IPv4 Setting …8-166
• IPv6 Setting …8-166
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
Optional Network:a b
1 Basic
[ Exit ]