TA Triumph-Adler P-3020 MFP User Manual
Page 316
8-110
Default Setting (System Menu)
Use the procedure below to set Select Key Set.
1
In the Sys. Menu/Count. menu, press the or key to
select [Document Box].
2
Press the OK key. The Document Box menu appears.
3
Press the or key to select [Select Key Set.].
4
Press the OK key. Select Key Set. appears.
5
Press the or key to select [Print] or [Store].
6
Press the OK key. This displays the flexible key selection
screen for the function selected in step 5. The screen
shown is the one when [Print] is selected.
7
Press the or key to select [Left] or [Right].
8
Press the OK key. This displays the function selection
screen for the flexible key selected in step 7. The screen
shown is the one when [Left] is selected.
9
Press the or key to select the function you want to
register to the flexible key.
10
Press the OK key. Completed. is displayed and the
screen returns to the Document Box menu.
IMPORTANT: If you try to set the function that is registered
to the other flexible key, you cannot set it and This function is
already registered. is displayed.
Sys. Menu/Count.:a b
8 Send
9 FAX
*********************
[ Exit
]
: Document Box
Document Box:
a b
*********************
2 Select Key Set.
3 Polling Box
[ Exit
]
1 Sub Address Box
Select Key Set.: a b
*********************
2 Store
[ Exit
]
1 Print
Print:
a b
*********************
2 Right
[ Exit
]
1 Left
Left:
a
b
3 Paper Selection
*********************
5 EcoPrint
4 *Duplex
This function is
already registered.