TA Triumph-Adler P-3020 MFP User Manual
Page 239
8
8-33
Default Setting (System Menu)
4
The Timer Settings menu appears.
5
Press the or key to select [Auto Err. Clear].
6
Press the OK key. Auto Err. Clear appears.
7
Press the or key to select [Off] or [On].
8
Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
•
Error Clear Timer
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options are
between 5 and 495 seconds (every five seconds). The default setting is 30 seconds.
If you set 0 as the time, errors are not displayed.
NOTE:
If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
1
In the Sys. Menu/Count. menu, press the or key to
select [Common Settings].
2
Press the OK key. The Common Settings menu appears.
Timer Setting:
a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit
]
1 Auto Panel Reset
Auto Err. Clear: a b
*********************
2
On
1 *Off
Sys. Menu/Count.: a
b
3 System/Network
4 User/Job Account
*********************
[ Exit
]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit
]
1 Language