TA Triumph-Adler P-3020 MFP - Manual (Page 230)

8-24
Default Setting (System Menu)
Switching Unit of Measurement
Select inch or metric for the unit for paper dimensions.
Use the procedure below to change the input units.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Measurement].
4 Press the OK key. The Measurement menu appears.
5 Press the  or  key to select [inch] or [mm].
6 Press the OK key. Completed. is displayed and the
screen returns to the Common Settings menu.
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Measurement: a b
1 inch
*********************
2 *mm