TA Triumph-Adler P-3020 MFP - Manual (Page 67)

2
Preparation before Use
2-33
E-mail settings
By configuring the SMTP settings, you can send E-mail notifications on completed jobs.
To use this function, this machine must be connected to a mail server using the SMTP protocol.
In addition, check the following.
• The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.
• SMTP settings
Use Embedded Web Server RX to register the IP address or host name of the SMTP server.
• If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.
The procedure for specifying the SMTP settings is explained below.
1 Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on 2-30.
2 From the Function Settings menu, click E-mail.