TA Triumph-Adler P-3020 MFP - Manual (Page 400)

10-10
Troubleshooting
Send error.
#### – An error has occurred during
transmission. The possible error
codes and their descriptions are as
follows.
1101: The server name of the SMTP
server is not set correctly or the host
name is incorrect when sending scan
data to an FTP server. Use
Embedded Web Server RX and
register the SMTP server name and
the host name correctly.
1102: The login user name is
incorrect or the domain name has not
been entered. Enter login user name,
domain name and password
correctly.
1103: The network path name is
incorrect or you do not have access
to the folder specified. Use
Embedded Web Server RX and
register the path name correctly.
1104: No recipient address. Enter E-
mail address correctly.
1105: E-mail - The SMTP protocol
setting is turned off. Use Embedded
Web Server RX and turn on the
SMTP protocol setting.
Scan to PC (SMB) - SMB setting is
turned off. Use Embedded Web
Server RX and turn on the SMB
setting.
Scan to PC (FTP) - FTP setting is
turned off. Use Embedded Web
Server RX and turn on the FTP
setting.
1106: The sender address setting
under E-mail: SMTP is not registered.
Use Embedded Web Server RX and
register the sender address.
—
Error Message Check Points Corrective Actions
Reference
Page