Interface block setting, Usb host (usb memory slot setting), Interface block setting -173 – TA Triumph-Adler P-3020 MFP User Manual
Page 379
8
8-173
Default Setting (System Menu)
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• USB Storage (USB storage setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is Unblock.
Use the procedure below to specify the USB Host setting.
1
In the Sys. Menu/Count. menu, press the or key to
select [System/Network], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2
The System/Network menu appears.
3
Press the or key to select [I/F Block Set.].
4
Press the OK key. The I/F Block Set. menu appears.
5
Press the or key to select [USB Host].
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
[ Exit
]
3 System/Network
Login User Name: L
b
*******************
Login Password:
[ Login
]
System/Network:
a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit
]
1 Network Setting
I/F Block Set.:
a b
*********************
2 USB Device
3 USB Storage
[ Exit
]
1 USB Host