TA Triumph-Adler P-3020 MFP - Manual (Page 292)

8-86
Default Setting (System Menu)
When KPDL Is Selected for Emulation
When you use the KPDL emulation mode, set whether or not to output KPDL error reports. The default setting is Off.
Use the procedure below to make the setting.
1 In Emulation Set, press the  or  key to select [KPDL].
2 Press the OK key. KPDL Error Rpt appears.
3 Press the  or  key to select [Off] or [On].
4 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
When KPDL(Auto) Is Selected for Emulation
If you use the KPDL(Auto) emulation mode, KPDL and another emulation mode can be automatically switched
according to the data (alternative emulation).
For alternative emulation, you can select one of the following printers. The default setting is PCL6.
• Line Printer
• IBM Proprinter
• EPSON LQ-850
• PCL6
Also, as when you select [KPDL (Auto)], set whether or not to output KPDL error reports. The default setting is Off.
Use the procedure below to make the setting.
1 In Emulation Set, press the  or  key to select
[KPDL(Auto)].
2 Press the OK key. Alt. Emulation appears.
Emulation Set.: a b
4 PCL6
*********************
6 KPDL(Auto)
5 KPDL
KPDL Error Rpt: a b
*********************
2 On 1 *Off
Emulation Set.: a b
4 PCL6
5 KPDL
*********************
6 KPDL(Auto)
Alt. Emulation: a b
3 DIABLO 630
4 EPSON LQ-850
*********************
5 *PCL6