TA Triumph-Adler P-3020 MFP - Manual (Page 63)

2
Preparation before Use
2-29
Embedded Web Server RX
If the machine is connected to the network, you can configure various settings using Embedded Web Server RX. This
section explains how to access Embedded Web Server RX, and how to change security settings and the host name.
For details on Embedded Web Server RX, refer to the Embedded Web Server RX User Guide.
NOTE: To fully access the features of the Embedded Web Server RX pages, enter the User Name and Password
and click [Login]. Entering the predefined administrator password allows the user to access all pages, including
Document Box, Address Book, and Settings on the navigation menu. The factory default setting for the default user
with administrator privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
Settings that the administrator and general users can configure in Embedded Web Server RX are as follows.
*1 The fax function only shows P-3025 MFP/P-3525 MFP.
*2 The logged in user may not be able to configure some settings, depending on the permissions of the user.
*3 This is displayed when the optional Card Authentication Kit is installed.
Login User Name Admin
Login Password Admin
Setting Description
Adminis-
trator
General
User
Device Information The machine's structure can be checked,.
Configuration, Counter, About Embedded Web Server
RX ○ ○
Job Status Displays all device information, including print and scan
jobs, storing jobs, scheduled jobs, and job log history.
Printing Jobs Status, Printing Job Log, Sending Job
Status, Scheduled Jobs, Sending Job Log, Storing
Job Status, Storing Job Log ○ ○
Document Box Add or delete document boxes, or delete documents
within a document box.
Sub Address Box
*1
, Polling Box
*1
, Job Box Settings
○ ○ *2
Address Book Create, edit, or delete addresses and address groups.
Machine Address Book, External Address Book
Settings, One Touch Key ○ ○
*2
Device Settings Configure the advanced settings of the machine.
Paper/Feed/Output, Original Settings, Energy Saver/
Timer, Date/Time, System ○ -
Function Settings Configure the advanced function settings.
Common/Job Defaults, Copy, Printer, E-mail, Scan to
Folder, FAX
*1 , Send and Forward,
Forward Rules
*1
, Operation Panel
○ -
Network Settings Configure the network advanced settings.
General, TCP/IP, Protocol ○ -
Security Settings Configure the security advanced settings.
Device Security, Send Security, Network Security,
Certificates ○ -
Management Settings Configure the advanced management settings.
Job Accounting, Authentication, ID Card
*3
,
Notification/Report, History Settings, SNMP, Reset
○ -