TA Triumph-Adler P-3020 MFP User Manual
Page 399
10
10-9
Troubleshooting
Paper jammed.
–
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the Message
Display. Leave the machine on and
follow the instruction to remove the
jammed paper.
Place original
and press Start key.
–
Remove originals from the document
processor, put them back in their
original order, and place them again.
Press the Start key to resume
printing.
Press the Stop key to cancel the job.
Polling box limit
exceeded.
Job is canceled.
–
Polling box is full, and no further
storage is available. The job is
canceled. Press the OK key.
—
Print overrun. Job is
canceled.
–
The job is canceled. Press the OK
key.
—
RAM disk error. Press
[OK]. ##
–
A RAM disk error has occurred. Look
at the error code given in place of ##.
The possible error codes and their
descriptions are as follows.
01: Format error. Try turning the
power off and on again.
02: RAM disk mode is Off. Turn RAM
disk mode On from the operation
panel.
04: No disk space. Purge
unnecessary files.
05: Specified file is not on disk.
06: Insufficient memory to support the
RAM disk system. Expand the
memory.
—
Removable memory is
full. Job is canceled.
–
This job is canceled. Press the OK
key.
—
Remove original from
document processor.
Are there any originals left in
the document processor?
Remove originals from the document
processor.
—
Replace MK.
–
Replacement of the parts in the
maintenance kit is necessary at every
100,000 pages of printing and
requires professional servicing.
Contact your service technician.
—
Restricted by Job
Accounting. Cannot
print.
–
This job cannot be printed because it
is restricted by Job Accounting. Press
the OK key.
—
Error Message
Check Points
Corrective Actions
Reference
Page