Adding a user – TA Triumph-Adler P-3020 MFP User Manual
Page 414
11-6
Management
Adding a User
This adds a new user. You can add Up to 100 users (including the default login user name). The table below explains
the user information to be registered.
NOTE:
By default, one of each default user with machine administrator rights and administrator privileges is already
stored. The following are the default user's properties.
User Name:
DeviceAdmin
Login User Name: 30 ppm model:3000, 35 ppm model:3500
Login Password:
30 ppm model:3000, 35 ppm model:3500
Access Level:
Administrator
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
Use the procedure below to register a new user.
NOTE:
Refer to Character Entry Method on Appendix-5 for details on entering characters.
1
Press the System Menu/Counter key on the main unit
operation panel.
Item
Description
User Name*
*
Mandatory at user registration.
Enter the name displayed on the user list (up to 32
characters).
Login User
Name*
Enter the login user name to log in (up to 32
characters). The same login user name cannot be
registered.
Login
Password*
Enter the password to log in (up to 64 characters).
Access Level*
Select Administrator or User for user access
privileges.
Account Name
Add an account where the user belongs. The user,
who registered his/her account name, can log in
without entering the account ID. Refer to Job
Accounting on page 11-15.
E-mail Address
The user can register his/her E-mail address. The
registered address will be automatically selected
for subsequent operations that need any E-mail
function.