TA Triumph-Adler P-3020 MFP - Manual (Page 294)

8-88
Default Setting (System Menu)
Override A4/LTR
If A4 size data is printed and there is only a letter-size cassette, the data is printed on letter paper. If letter-size data
is printed and there is only an A4 size cassette, the data is printed on A4 paper. The table below shows the available
settings.
Use the procedure below to specify the override A4/Letter setting. The default setting is On.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Printer].
2 Press the OK key. The Printer menu appears.
3 Press the  or  key to select [Override A4/LTR].
4 Press the OK key. Override A4/LTR appears.
5 Press the  or  key to select [Off] or [On].
6 Press the OK key. Completed. is displayed and the
screen returns to the Printer menu.
Item Description
On If A4 size data is printed and there is only a
letter-size cassette, the data is printed on
letter paper. If letter-size data is printed and
there is only an A4 size cassette, the data
is printed on A4 paper.
Off A4 and Letter are not regarded as the
same in size.
Sys. Menu/Count.:a b
5 Common Settings
6 Copy
*********************
[ Exit ]
7 Printer
Printer: a b
*********************
2 EcoPrint
3 Override A4/LTR
[ Exit ]
1 Emulation Set.
Override A4/LTR: a b
1 Off
*********************
2 *On