Document Outline

• 1. INTRODUTION
  • 1.1 Packet Contents
  • 1.2 Product Description
  • 1.3 How to Use This Manual
  • 1.4 Product Features
  • 1.5 Product Specification
• 2. INSTALLATION
  • 2.1 Hardware Description
    • 2.1.1 Switch Front Panel
    • 2.1.2 LED Indications
    • 2.1.3 Switch Rear Panel
  • 2.2 Install the Switch
    • 2.2.1 Desktop Installation
    • 2.2.2 Rack Mounting
    • 2.2.3 Installing the SFP transceiver
• 3. SWITCH MANAGEMENT
  • 3.1 Requirements
  • 3.2 Management Access Overview
  • 3.3 Administration Console
  • 3.4 Web Management
  • 3.5 SNMP-Based Network Management
  • 3.6 Protocols
    • 3.6.1 Virtual Terminal Protocols
    • 3.6.2 SNMP Protocol
    • 3.6.3 Management Architecture
• 4. WEB CONFIGURATION
  • 4.1 Main WEB PAGE
  • 4.2 System
    • 4.2.1 System Information
    • 4.2.2 Network Management
    • 4.2.3 Time Setting
    • 4.2.4 Green Ethernet
  • 4.3 Port Management
    • 4.3.1 Port Configuration
    • 4.3.2 LACP Property
    • 4.3.3 LAG Group
  • 4.4 VLAN
    • 4.4.1 VLAN Overview
    • 4.4.2 IEEE 802.1Q VLAN
    • 4.4.3 Create VLAN
    • 4.4.4 VLAN Setting
    • 4.4.5 VLAN Port
    • 4.4.6 GVRP
  • 4.5 Spanning Tree
    • 4.5.1 RSTP (Rapid Spanning Tree Protocol)
    • 4.5.2 RSTP Port
    • 4.5.3 MSTP
    • 4.5.4 MSTP Port
    • 4.5.5 MSTP Instance
    • 4.5.6 MSTP Interface
  • 4.6 Multicast
    • 4.6.1 IGMP Snooping
    • 4.6.2 Static Multicast
    • 4.6.3 Static Multicast Table
    • 4.6.4 IGMP
  • 4.7 Security
    • 4.7.1 Port Security
    • 4.7.2 ACL
    • 4.7.3 802.1x
      • 4.7.3.1 Understanding IEEE 802.1X Port-Based Authentication
      • 4.7.3.2 802.1x Port Configuration
      • 4.7.3.3 Windows Platform RADIUS Server Configuration
      • 4.7.3.4 802.1X Client Configuration
    • 4.7.4 RADIUS
    • 4.7.5 TACACS+
    • 4.7.6 Storm Control
    • 4.7.7 Management IP List
    • 4.7.8 Auto DoS
    • 4.7.9 SSH
    • 4.7.10 DHCP Snooping
    • 4.7.11 Dynamic ARP Inspection
    • 4.7.12 IP Source Guard
    • 4.7.13 HTTPS
  • 4.8 Quality of Service
    • 4.8.1 Understand QOS
    • 4.8.2 Queue Settings
    • 4.8.2 DSCP
    • 4.8.3 802.1P
    • 4.8.4 Port-Based QoS
    • 4.8.5 Rate Control
    • 4.8.6 DSCP Remark
  • 4.9 SNMP
    • SNMP Overview
    • 4.9.1 SNMP
    • 4.9.2 Group Profile
    • 4.9.3 User Profile
    • 4.9.4 Community Profile
    • 4.9.5 SNMP Trap Station
  • 4.10 LLDP
    • 4.10.1 LLDP Settings
    • 4.10.2 LLDP Statistics
    • 4.10.3 Local Information
    • 4.10.4 Remote Information
  • 4.11 ADMIN
    • 4.11.1 Admin Password
    • 4.11.2 L2 Table
    • 4.11.3 Static Address
    • 4.11.4 Port Mirroring
    • 4.11.5 Admin Timeout
    • 4.11.6 Firmware Upgrade
    • 4.11.7 Reboot
    • 4.11.8 Save Configurations
    • 4.11.9 Logs Settings
    • 4.11.10 Log Server
    • 4.11.11 Memory Logs
    • 4.11.12 Flash Logs
    • 4.11.13 Ping Function
    • 4.11.14 Cable Diagnostic
    • 4.11.15 DHCP Relay
    • 4.11.16 DHCP Option 82
    • 4.11.17 Self Loop Detection
    • 4.11.18 BOOTP Configure Download
  • 4.12 Statistics
    • 4.12.1 802.1X Statistic
    • 4.12.2 RMON Statistic
    • 4.12.3 RMON Event
    • 4.12.4 RMON Event Log
    • 4.12.5 RMON Alarm
    • 4.12.6 RMON History
• 5. COMMAND LINE INTERFACE
  • 5.1 Accessing the CLI
    • Logon to the Console
    • Configure IP address
  • 5.2 Telnet login
• 6. COMMAND LINE MODE
  • 6.1 User Mode commands
    • help
    • logout
    • ping
    • show port
    • show network
    • show system
    • show port statistics
    • enable
    • Save
  • 6.2 Privileged Mode commands
    • cable-diag port
    • 6.2.1 Clear Command
      • clear arl dynamic
      • clear arl static mac
      • clear config
      • clear counters
      • clear igmpsnooping
      • clear static-mcast
      • clear pass
      • clear lacp
      • clear logs
      • clear vlan
      • configuration
    • 6.2.2 Copy Command
      • copy nvram_config tftp
      • copy system_image tftp
      • copy tftp
      • exit
      • help
      • logout
      • ping
      • reload
      • save
    • 6.2.3 Show Command
      • show qos
      • show qos cos
      • show qos queue-settings
      • show qos advanced
      • show qos advanced mode
      • show qos advanced dscp
      • show qos advanced ip-precedence
      • show qos port-based
      • show qos port-based port
      • show qos port-based all
      • show dot1x
      • show dot1x config
      • show dot1x radius
      • show dot1x statistics
      • show igmpsnooping
      • show igmpsnooping dynamic_router_port
      • show igmpsnooping groups
      • show igmpsnooping info
      • show lag
      • show lag lag-index
      • show lag all
      • show lldp
      • show lldp statistic
      • show lldp local
      • show lldp msap
      • show lldp msap-entry
      • show logging
      • show logging memory-log
      • show logging flash-log
      • show monitor
      • show network
      • show port
      • show port port-index
      • show port all
      • show port-security
      • show port-security port
      • show port-security all
      • show rate-limit
      • show rate-limit port
      • show rate-limit all
      • show running-config
      • show snmp
      • show snmp groups
      • show snmp users
      • show snmp communities
      • show snmp info
      • show sntp
      • show spanning-tree
      • show spanning-tree interface
      • show spanning-tree interface port
      • show spanning-tree interface all
      • show spanning-tree mst
      • show spanning-tree mst detailed
      • show spanning-tree mst instance
      • show spanning-tree mst summary
      • show spanning-tree status
      • show storm-control
      • show sysinfo
      • show switch
      • show switch admin-time
      • show switch age-time
      • show switch mac-table
      • show switch mac-table all
      • show switch mac-table vlan
      • show switch mac-table port
      • show switch mcast-table
      • show switch mac
      • show trapflags
      • show vlan
      • show vlan member
      • show vlan number
      • show rmon
      • show rmon event Index
      • show rmon event
      • Show rmon event log event _index
      • show rmon alarm index
      • show rmon alarm
      • show rmon history
      • show rmon history index
      • show rmon history
      • show rmon statistics
      • show poe port-index
      • show poe all
      • show poe system-status
      • show tacplus
      • show arp
      • show acl
      • show dhcpsnooping config
      • show dhcpsnooping port
      • show dhcpsnooping vlan
      • show dhcpsnooping database
      • show dhcpsnooping database all
      • show dhcpsnooping database static
      • show dhcpsnooping database dynamic
      • show ipsrcgd config
      • show ipsrcgd ports
      • show ipsrcgd database
      • show https
      • show loop_detect
      • telnet
  • 6.3 Global Config mode commands
    • exit
    • 6.3.1 VLAN Command
      • vlan add
      • vlan add number
      • vlan add range
      • vlan delete
      • vlan port
      • vlan port all
      • vlan port all port-configure
      • vlan port all protected
      • vlan port all pvid
      • vlan port ports
      • vlan port ports port-configure
      • vlan port ports protected
      • vlan port ports pvid
      • vlan lag
      • vlan lag vlan < vlan-id> exclude
      • vlan lag vlan <vlan-ID> untagged
      • vlan lag vlan <vlan-ID> tagged
      • Bridge aging-time
    • 6.3.2 Link Aggregation Command
      • lacp-syspri system-priority
      • link-aggregation
      • link-aggregation addport
      • link aggregation delport
      • Link Aggregation delport all
      • link aggregation delport lag
    • 6.3.3 LLDP Command
      • lldp enable
      • lldp disable
      • lldp adv-interval
      • lldp fast-startcnt
      • lldp hold
      • lldp notify-interval
      • lldp reinit-delay
      • lldp tx-delay
      • lldp mgmt-addrtxport
    • 6.3.4 Log Command
      • log
      • log log-server
      • log log-server name <WORD>add
      • log log-server name <word> delete
      • log logging-target
      • log logging-target memory
      • log logging-target flash
      • log logging-target console
      • log logging-target server name <WORD>
      • radius-server ip
      • static-address add
      • static-address delete
    • 6.3.5 Mgmt Command
      • mgmt-accesslist ipaddr
      • mgmt-accesslist enable
      • mgmt-accesslist disable
    • 6.3.6 Monitor Command
      • monitor enable
      • monitor disable
      • monitor des
      • monitor des <port-ID> probetype bidirection
      • monitor des <port-ID> probetype ingress
      • monitor des <port-ID> probetype egress
    • 6.3.7 dot1x Command
      • dot1x enable
      • dot1x disable
      • dot1x port-control
      • dot1x port-control enable port
      • dot1x port-control disable port
    • 6.3.8 network Command
      • network mgmt-vlan
      • network parms
      • network protocol
      • network dhcp-relay
      • network dhcp-relay mode
      • network dhcp-relay server
      • network dhcp-relay vlan
      • network dhcp-relay vlan <vlan-ID> add
      • network dhcp-relay vlan <vlan-ID> remove
      • network sysinfo
      • Network sysinfo sysname
      • network sysinfo syslocate
      • network sysinfo syscontact
      • network admin-timeout
    • 6.3.9 Port Command
      • port-all admin-mode
      • port-all auto-negotiate
      • port-all flow-control
      • port-all portsec-lockmode
      • port-all portsec-lockmode none
      • port-all portsec-lockmode dynamic max-entries
      • port-all rate-limit
      • port-all rate-limit egress
      • port-all rate-limit ingress
      • port-all rmon-counter
      • port-all speed
      • port-all storm-control
      • port-all storm-control disable
      • port-all storm-control broadcast
      • port-all storm-control broadcast-multicast
      • port-all storm-control broadcast-unknown
      • port-all storm-control all-cast
    • 6.3.10 QoS Command
      • qos qos-advanced
      • qos qos-advanced DSCP
      • qos qos-advanced ip_precedence
      • qos qos-advanced none
      • qos cos priority
      • qos dscp
      • qos port-based port <WORD>status
      • qos scheduling
      • qos scheduling strict
      • qos scheduling wrr
      • qos ip-precedence
      • qos wrr weight
      • qos dscp-remark acl_entry_name
    • 6.3.11 Set Commang
      • set IGMP
      • set igmp enable
      • set igmp disable
      • set igmp last-memberquery
      • set igmp last-membercount
      • set igmp query-interval
      • set igmp query-resinterval
      • set igmp robustness
      • set igmp router-port ports
      • set igmp-querier
      • set igmp-proxy
      • set static-mcast
      • set static-mcast name <WORD> add vid
      • set static-mcast name <WORD>delete
    • 6.3.12 SNMP Command
      • snmp notify
      • snmp group add
      • snmp group delete
      • snmp user add
      • snmp user delete
      • snmp community add
      • snmp community delete
      • snmp trapstation add <ip-addr> community <community name> type bootup trap-version
      • snmp trapstation add <ip-addr> community <community name> type linkchangetrap-version
      • snmp trapstation add <ip-addr> community <community name> type both trap-version
      • snmp trapstation add <ip-addr> community <community name> type none trap-version
      • snmp trapstation delete
    • 6.3.13 SNTP Command
      • sntp daylight
      • sntp localtime
      • sntp localtime enable
      • sntp localtime localtime_date
      • sntp server enable
      • sntp server ipaddr
      • sntp server polling
      • sntp timezone
    • 6.3.14 Spanning-tree Command
      • spanning-tree forceversion
      • spanning-tree forceversion 8021s
      • spanning-tree forceversion 8021w
      • spanning-tree forceversion none
      • spanning-tree configuration
      • spanning-tree configuration name
      • spanning-tree configuration revision
      • spanning-tree forward-time
      • spanning-tree max-age
      • spanning-tree max-hops
      • spanning-tree port
      • spanning-tree port all
      • spanning-tree port cost
      • spanning-tree port priority
      • spanning-tree port edge
      • spanning-tree port force-p2plink
      • spanning-tree port migration-check
      • spanning-tree port root-guard
      • spanning-tree priority
      • spanning-tree mst
      • spanning-tree mst instance
      • spanning-tree mst instance add vlan
      • spanning-tree mst instance delete
      • spanning-tree mst vlan
      • spanning-tree mst vlan <MST ID> <vlan list> add
      • Spanning-Tree mst vlan <MST ID> <vlan list> delete
      • spanning-tree mst bridgepri
      • spanning-tree mst cost
      • spanning-tree mst priority
      • user password
      • Interface
    • 6.3.15 RMON Command
      • rmon
      • rmon event index
      • rmon alarm index
      • rmon del
      • rmon del event index
      • rmon del alarm index
    • 6.3.16 Access list Command
      • access-list name <WORD> add priority
      • access-list name <WORD> action
      • access-list name <WORD> action deny
      • access-list name <WORD> action permit
      • access-list name <WORD> clear
      • access-list name <WORD> clears SRC IP
      • access-list name <WORD> clears DST IP
      • access-list name <WORD> clear L4port
      • access-list name <WORD> clear L4port SRC port
      • access-list name <WORD> clear l4port DST port
      • access-list name <WORD> clear packet-type
      • access-list name <WORD> clear mac SA
      • access-list name <WORD> clear MAC DA
      • access-list name <WORD> clear VID
      • access-list name <WORD> clear ether-type
      • access-list name <WORD> deletes
      • access-list name <WORD> {enable|disable}
      • access-list name <WORD> set
      • access-list name <WORD> set priority
      • access-list name <WORD> set IP-mode
      • access-list name <WORD> set IP-mode SRC IP.
      • access-list name <WORD> set IP-mode DST IP
      • access-list name <WORD> set L4port
      • access-list name <WORD> set l4port SRC-port SRE-port
      • access-list name <WORD> set l4port DST-port
      • access-list name <WORD> set IP-mode packet-type
      • access-list name <WORD> set mac-mode
      • access-list name <WORD> set mac-mode mac SA
      • access-list name <WORD> set mac-mode mac DA
      • access-list name <WORD> set mac-mode ether-type
      • access-list name <name> set portlist
    • 6.3.17 ARP Command
      • arp dynamic
      • arp dynamic aging-time
      • arp dynamic ports
      • arp dynamic vlan
      • arp static
    • 6.3.18 Dos Command
      • dos land
      • dos blat
      • dos syn-fin
      • dos ports
      • dos ports smurf
      • dos ports ping-flooding
      • dos ports synack-flooding
      • tacplus authen_type
      • tacplus add server
      • tacplus del server
      • green-eth
    • 6.3.19 DHCP Snooping Command
      • dhcpsnooping enable
      • dhcpsnooping disable
      • dhcpsnooping option82
      • dhcpsnooping verifymac
      • dhcpsnooping ports
      • dhcpsnooping ports trust
      • dhcpsnooping ports untrust
      • dhcpsnooping vlan
      • dhcpsnooping vlan add
      • dhcpsnooping vlan remove
      • dhcpsnooping static
      • dhcpsnooping static add ip
      • dhcpsnooping static delete ip
      • dhcpsnooping dyamic
      • dhcpsnooping dynamic add ip
      • dhcpsnooping dynamic delete ip
    • 6.3.20 Loop_detect Command
      • Loop_detect enable
      • loop_detect disable
      • loop_detect recovertime
      • loop detect trytorecover
    • 6.3.21 GVRP Command
      • gvrp enable
      • gvrp disable
      • gvrp port_enable
      • gvrp port_disable
      • gvrp port_status
      • https
    • 6.3.22 BOOTP Command
      • bootp enable
      • bootp disable
      • bootp renew
    • 6.3.23 SSH Command
      • ssh enable
      • ssh disable
      • ssh changekey
    • 6.3.24 IP Source Guard Command
      • ipsrcgd enable
      • ipsrcgd disable
      • ipsrcgd ports
      • ipsrcgd retry
      • ipsrcgd retry now
  • 6.4 Interface Config mode commands
    • exit
    • 6.4.1 dot1x Command
      • Set 802.1x port control.
      • lacp admin
      • lacp priority
      • addport
      • delport
    • 6.4.2 LLDP Command
      • lldp state
      • lldp notifications
      • lldp tlvs-tx
    • 6.4.3 Port-security Command
      • port-security
      • port-security lock-mode
      • port-security lock-mode dynamic max-entries 24
      • qos port-based priority
      • Qos port-based status
    • 6.4.4 Rate-limit Command
      • rate-limit egress enable token bsize
      • rate-limit egress disable
      • rate-limit ingress
      • storm-control
      • storm-control broadcast
      • storm-control broadcast-multicast
      • storm-control broadcast-unknown
    • 6.4.5 Spanning tree Command
      • spanning-tree cost
      • spanning-tree edge
      • spanning-tree force-p2plink
      • spanning-tree migration-check
      • spanning-tree mst cost
      • spanning-tree mst priority
      • spanning-tree participation
      • spanning-tree priority
    • 6.4.6 VLAN Command
      • vlan participation exclude
      • vlan participation
      • vlan protected
      • vlan dropnq
      • vlan pvid
      • Interface commands
• 7. SWITCH OPERATION
  • 7.1 Address Table
  • 7.2 Learning
  • 7.3 Forwarding & Filtering
  • 7.4 Store-and-Forward
  • 7.5 Auto-Negotiation
• 8 . TROUBLE SHOOTING
• APPENDEX A
  • A.1 Switch's RJ-45 Pin Assignments
  • A.2 10/100Mbps, 10/100Base-TX
  • A.3 Available Modules
• APPENDEX B : GLOSSARY