PLANET EPL-1000 - Manual (Page 18)

Note — The chassis should be empty during the chassis mounting procedures.
Remove any unit in the chassis, and store them according to
static-sensitive device storage procedures.
Warning — Hazardous voltages may exist on the chassis. Always practice good
safety habits when wiring a live circuit or performing maintenance.
Step 2. Power Connections
AC Power Connection
Connect the AC power cord to the AC supply socket on the rear panel of the OLT, and plug
the cord into the external power source. The voltage must be 100 to 240V AC (±10%
tolerance).
Warning — Ensure that all power sources to the chassis (power distribution
panel) are turned off during the connection.
- 18 -