PLANET EPL-1000 - Manual (Page 51)

„ ARP Proxy
This is future functionality and will be described upon completion.
„ Dyn. IP Learn Table Size
Dyn. IP Learn Table Size Specifies the number of IP addresses that may be learned.
„ DHCP Relay Agent IP SA
Specifies the IP source address to be used for the relay agent. This is the address to be
used for grAddr ,inserted into DHCP frames modified by the OLT.
„ IPv4 Dynamic Filter Table
The learned IPv4 address table is exposed by the L3 Table tab on the GUI If any of the
checkboxes in the Mode box are checked the L3 switching shall be enabled. Otherwise L3
switching is disabled. If desired, Relay Agent IP SA may be provisioned with the same
value as the IGMP Proxy.
All L3 parameters must be selected in-order for the OLT to insert DHCP Option 82 into
upstream DHCP frames. Currently the OLT appends DHCP Option 82 to all L3 frames. The
Relay Agent IP must be an IP on the same subnet as the DHCP server. If the L3 switching
function is enable the Dyn. IP Learn. Table Size field should be provisioned with a non-zero
value.
- 51 -