ProSoft Technology PS69-DPM - Manual (Page 107)

PS69-DPM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 107 of 130
October 1, 2014
The maximum length of a bus segment depends on the baud rate used. Only PROFIBUS
certified cable, preferably the cable type A, should be used.
Baud rate in kBit/s Max. Distance
9.6 1,200 m / 4000 ft
19.2 1,200 m / 4000 ft
93.75 1,200 m / 4000 ft
187.5 1,000 m / 3280 ft
500 400 m / 1300 ft
1,500 200 m / 650 ft
3,000 100 m / 325 ft
6,000 100 m / 325 ft
12,000 100 m / 325 ft
Parameter Value
Impedance 135 to 65 Ohm
Capacity < 30 pF/m
Loop resistance 110 Ohm/km
Wire gauge 0.64 mm
6.1.4 Hardware Specifications
Specification Description
Processor EC1-160P with integrated ASPC2
PROFIBUS Interface RS-485, max. 12 MBaud, potential free, according EN
50170
Diagnostic Interface RS232, PS/2 Mini DIN female connector, 9600 Baud, non
isolated
Power Supply +5 V ±5 % / 260 mA
Max. Distance Rating max. 6 modules to the power supply module
Dimensions Standard 1769 Single-slot module
Burst EN 61000-4-4, 2 kV, 5 kHz
Surge EN 61000-4-5, 2 kV common mode, 1 kV differential
mode
ESD EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Radiated/ Conducted
Immunity EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1 kHz
sinewave
EN 61000-4-6, 10 V, 0,15...30 MHz
Radiated/ Conducted
Emission EN 55011 Class A
Vibration/Shock IEC 600068-2-6, 10-150 Hz, ± 0,75 mm, ± 1 g, 1
Octave/min
IEC 600068-2-27, 15 g, 11 ms
Operating Temp. 0 to 60°C (32 to 140°F)
Relative Humidity 5 to 95% (non-condensing)