ProSoft Technology PS69-DPM - Manual (Page 111)

PS69-DPM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 111 of 130
October 1, 2014
6.3.4 Input: DPM_GLOBAL_STATE_FIELD
Name Data Type Description
Ctrl BOOL Control error
Aclr BOOL Auto clear error
Nexc BOOL Non exchange error
Fat BOOL Fatal error
Eve BOOL Event error
NRdy BOOL Host not ready notification
Tout BOOL Timeout
Reserved1 BOOL Reserved
DPM_State SINT Master main state
Err_rem_adr SINT Faulty remote address
Err_event SINT Error Number
Bus_err_cnt INT Heavy bus error counter
Time_out_cnt INT Number of rejected PROFIBUS Telegr.
Reserved SINT[8] Reserved
Sl_cfg BOOL[128] Slave Config
Sl_state BOOL[128] Slave State
Sl_diag BOOL[128] Slave Diag
6.3.5 Input: DPM_SLAVE_DIAG_DATA
Name Data Type Description
SlaveAddress SINT Slave address
Sta1_StationNotExist BOOL No response
Sta1_StationNotReady BOOL Station not ready
Sta1_CfgFault BOOL Configuration faulty
Sta1_ExtDiag BOOL Extended diagnostic
Sta1_NotSupp BOOL Sync,Freeze not supported
Sta1_InvalidResponse BOOL Response faulty
Sta1_PrmFault BOOL Parameters faulty
Sta1_MasterLock BOOL Locked by a master
Sta2_PrmReq BOOL Request new parameter
Sta2_StatDiag BOOL Static diagnostic
Sta2_Slave BOOL Set to 1 by a slave
Sta2_Watchdog BOOL Watchdog ON/OFF
Sta2_FreezeMode BOOL Freeze mode active
Sta2_SyncMode BOOL Sync mode active
Sta2_Reserved BOOL Reserved
Sta2_Deactivated BOOL Slave deactivated
Sta3_Reserved0 BOOL Reserved
Sta3_Reserved1 BOOL Reserved