ProSoft Technology PS69-DPM - Manual (Page 30)

Contents PS69-DPM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS DPV1 Master
Page 30 of 130 ProSoft Technology, Inc.
October 1, 2014
1.10 Downloading the Sample Program to the Processor
Note: The key switch on the front of the CompactLogix processor must be in the REM or PROG position.
1 If you are not already online to the processor, open the C OMMUNICATIONS menu, and
then choose D OWNLOAD . RSLogix will establish communication with the processor.
2 When communication is established, RSLogix will open a confirmation dialog box. Click
the D OWNLOAD button to transfer the sample program to the processor.
3 RSLogix will compile the program and transfer it to the processor. This process may take
a few minutes.
4 When the download is complete, RSLogix will open another confirmation dialog box.
Click OK to switch the processor from PROGRAM mode to RUN mode.
Note: If you receive an error message during these steps, refer to your RSLogix documentation to interpret and
correct the error.