ProSoft Technology PS69-DPM - Manual (Page 32)

Contents PS69-DPM ♦ CompactLogix or MicroLogix Platform
User Manual PROFIBUS DPV1 Master
Page 32 of 130 ProSoft Technology, Inc.
October 1, 2014
3 Click to select the driver, and then click C ONFIGURE . This action opens the Configure
RS-232 DF1 Devices dialog box.
4 Click the A UTO -C ONFIGURE button. RSLinx will attempt to configure your serial port to
work with the selected driver.
5 When you see the message Auto Configuration Successful, click the OK button to
dismiss the dialog box.
Note: If the auto-configuration procedure fails, verify that the cables are connected correctly between the
processor and the serial port on your computer, and then try again. If you are still unable to auto-configure the
port, refer to your RSLinx documentation for further troubleshooting steps.