ProSoft Technology PS69-DPM - Manual (Page 9)

PS69-DPM ♦ CompactLogix or MicroLogix Platform Contents
PROFIBUS DPV1 Master User Manual
ProSoft Technology, Inc. Page 9 of 130
October 1, 2014
1.3 Hardware Requirements
The following minimum hardware is required to use the PS69-DPM PROFIBUS module.
CompactLogix System
 Personal Computer
 1769: Programmable Controller
 1769: Power Supply
 1769: Right or Left handed Termination End Cap
 Serial Cable for interface to the 1769-Programmable Controller.
 Serial Cable for PROSOFT.fdt (SYCON.net) to Diagnostic port connection ProSoft part
number CAB-SRV-MD8
MicroLogix 1500 System
 Personal Computer
 1764: MicroLogix 1500 Programmable Controller
 1769: Right handed Termination End Cap
 Serial Cable for interface to the 1764-Programmable Controller.
 Serial Cable for PROSOFT.fdt (SYCON.net) to Diagnostic port connection ProSoft part
number CAB-SRV-MD8
1.4 Reference Systems
The firmware of the communication module PS69-DPM was developed and tested with
following CompactLogix Controller types and firmware revisions.
CompactLogix System
PS69-DPM CompactLogix 1769-L20 CompactLogix 1769-L32E
Firmware V10.2 Firmware V13.18 Firmware V13.28
MicroLogix 1500 System
PS69-DPM MicroLogix 1500 (Processor 1764-LRP/A Rev2.0)
Firmware V10.2 Firmware: OS 1510; Series C ; Revision 9.0