Nikon Zfc Mirrorless Camera with 28mm Lens - Manual (Page 172)

Still images
172
An icon appears in the display when a setting other than [O ff] is
selected.
D
Using vibration reduction: Notes
･ Vibration reduction may be unavailable with some lenses.
･ We recommend that you wait for the image in the display to stabilize
before shooting.
･ Depending on the lens, when vibration reduction is active, the image in
the viewfinder may jiggle after the shutter is released, but this does not
indicate a malfunction.
･ [Normal] or [Sport] is recommended for panning shots. In [Normal] or
[Sport] mode, vibration reduction applies only to motion that is not part
of the pan. If the camera is panned horizontally, for example, vibration
reduction will be applied only to vertical shake.
･ If you will use a tripod or monopod with a VR lens camera, the settings
may differ depending on the lens. Consult the lens documentation before
use for more information.
AF-area mode
AF-area mode controls how the camera selects the focus-point for
autofocus. For more information, see “AF-area mode” in the “Focus”
section of “Basic settings” (
0
102).
Option
3
[Pinpoint AF]
d
[Single-point AF]
e
[Dynamic-area AF]
Option
f
[Wide-area AF (S)]
g
[Wide-area AF (L)]
1
[Wide-area AF (L-people)]