Nikon Zfc Mirrorless Camera with 28mm Lens - Manual (Page 488)

Troubleshooting
488
Troubleshooting
Solutions to some common issues are listed below.
･ Troubleshooting information for the SnapBridge app can be found in
the app’s online help, which can be viewed at:
https://nikonimglib.com/snbr/onlinehelp/en/index.html
･ For information on the Wireless Transmitter Utility, see the utility’s
online help.
Problem Solution
The camera displays a
TCP/IP error.
Connection settings require adjustment. Check
settings for the host computer or wireless router
and adjust camera settings appropriately (
0
411).
The camera displays a
“no memory card”
error. The memory card is inserted incorrectly or not at all.
Confirm that the memory card is correctly inserted
(
0
75).
Upload is interrupted
and fails to resume. Upload will resume if the camera is turned off and
then on again (
0
473).
The connection is
unreliable.
If [A uto] is selected for [Channel] when you are
connecting to a smart device, choose [Manual] and
select the channel manually (
0
410).
If the camera is connected to a computer in
infrastructure mode, check that the router is set to a
channel between 1 and 8 (
0
411).