Nikon Zfc Mirrorless Camera with 28mm Lens User Manual
Page 484
Connecting to smart devices
484
D
Before connecting (Wi-Fi mode)
･
Enable Wi-Fi on the smart device. For details, see the documentation
provided with the device.
･
Ensure that the batteries in the camera and smart device are fully charged
to prevent the devices turning off unexpectedly.
･
Check that there is space available on the camera memory card.
Connecting
❚
❚
Follow the steps below to establish a connection between the camera
and smart device in Wi-Fi mode.
･
Some operations are performed using the camera, others on the
smart device.
･
Additional instructions are available via SnapBridge online help.
1
Smart device: Launch the SnapBridge app, open the tab, tap
, and select [Wi-Fi mode].
･
If this is the first time you have launched the app, you should
instead tap [Connect to camera] in the welcome display. When
prompted, tap the category for your camera and then tap the “Wi-
Fi” option when prompted to choose the connection type.
2
Camera/smart device: Turn the camera on when prompted.
Do not use any of the controls in the app at this point.