Nikon Zfc Mirrorless Camera with 28mm Lens - Manual (Page 519)

Problems and solutions
519
･ Randomly-spaced bright pixels, fog, or bright spots may arise as a result
of increases in the temperature of the camera’s internal circuits. Turn the
camera off when it is not in use.
･ Randomly-spaced bright pixels, fog, lines or unexpected colors may
appear if you press the
X
button to zoom in on the view through the
lens during shooting.
･ Note that the distribution of noise in the display may differ from that in
the final picture.
The camera cannot measure a value for preset manual white
balance: ●
The subject is too dark or too bright.
Certain pictures cannot be selected as sources for preset manual
white balance: ●
Pictures created with cameras of other types cannot serve as sources for
preset manual white balance.
White balance (WB) bracketing is unavailable: ●
･ White balance bracketing is not available when a RAW or RAW + JPEG
option is selected for image quality.
･ White balance bracketing cannot be used in multiple exposure and HDR
modes.
The effects of [Set Picture Control] differ from image to image: ●
[Auto] is selected for [Set Picture Control] or as the basis for a custom
Picture Control created using [Manage Picture Control], or [A] (auto) is
selected for [Quick sharp], [Contrast], or [Saturation]. For consistent
results over a series of photographs, choose a setting other than [A] (auto).
The option selected for metering cannot be changed: ●
The option selected for metering cannot be changed during exposure
lock.
Exposure compensation is not available: ●
Changes to exposure compensation in mode M apply only to the
exposure indicator and have no effect on shutter speed or aperture.