Parts and their functions, Control panel – Panasonic AW-RP60 Remote Camera Controller User Manual
Page 10
10
Parts and their functions
Control panel
POWER
MENU
STORE
DELETE
PRESET
AWB
AUTO
IRIS
ZOOM
FOCUS
AUTO
PTZ SPEED
LOW
HI
CAMERA SELECTION
PRESET MEMORY SELECTION
OTAF
WIDE
TELE
ABB
F1
1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
F2
F3
F4
SELECT
ON/OFF
CAMERA OSD
EXIT
F5
USER 1
USER 2
USER 3
ENABLE
SHIFT
PAN
TILT
USER 4
BARS
ALARM
Menu operation
section
User button section
Color adjustment
section
Focus, zoom and iris
section
Camera selection section
Pan and tilt section
Preset memory
selection section
1
POWER indicator [POWER]
This turns on when the POWER switch (
) on the rear panel is set to
ON while power is supplied.
2
ALARM indicator [ALARM]
This turns on when an alarm has been received from the selected
remote camera.
3
LCD panel
Displays the status screen or menu.
4
MENU button [MENU]
When you press the MENU button, the menu will be displayed on the
LCD panel.
This is lit while the menu is displayed.
Menu operation section
F1
F2
F3
F4
SELECT
ON/OFF
CAMERA OSD
EXIT
F5
5
CAMERA OSD SELECT dial [CAMERA OSD SELECT]
When the CAMERA OSD ON/OFF button is lit, turn the dial to find the
menu and then press it to select.
6
F5 dial [F5] (menu operation dial)
When a menu screen is displayed on the LCD panel, turn the dial to
find the menu and then press it to select.
7
F1 dial [F1], F2 dial [F2], F3 dial [F3], F4 dial [F4] (menu
operation dials)
Use these dials to manipulate the setting values displayed on the
LCD panel of the unit.
Turn F1 to F4 dials to select setting values, etc.
When the status screen is displayed, use them to manipulate the item
values displayed in the lower part of the LCD panel.
When a menu screen is displayed, use them to manipulate the
selected menu item values.
8
CAMERA OSD ON/OFF button
[CAMERA OSD ON/OFF]
Use this to switch the CAMERA OSD ON or OFF.
9
EXIT button [EXIT]
When you press the EXIT button while a menu screen is displayed on
the LCD panel, the screen will return to the previous menu.
When the status screen is displayed, if you press the EXIT button
while manipulating the items that are allocated to the F1 through F4
dials, the operation of the dial will be canceled.