Panasonic AW-RP60 Remote Camera Controller - Manual (Page 79)

79
Setup Software (continued)
Displaying the [Update] tab
Upgrades the software version of the AW‑RP60.
1
2
1 FILE SELECT button
Selects the file to be used for the upgrade and displays it.
2 UPDATE button
Upgrades the software of the AW‑RP60.
The status during the upgrade is displayed as transfer data size/data size (the size of the file for upgrading).
Note that if the FPGA version is the same, only the software is upgraded.
After the upgrade is complete, turn the power OFF then ON to restart AW‑RP60.