Introduction, Overview, Required personal computer environment – Panasonic AW-RP60 Remote Camera Controller User Manual

Page 6: Disclaimer of warranty, Network security, Upgrade software, File types handled by the unit

Advertising
background image

6

Introduction

„

„

Overview

This unit is a remote camera controller for controlling remote camera

(sold separately).

It can be used to control up to 200 remote cameras when IP connections

are used, and up to 5 remote cameras when serial connections are

used.

„

„

Required personal computer environment

For the software used with the unit, use a personal computer specified

on the following website.

https://pro‑av.panasonic.net/

„

„

Disclaimer of warranty

IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY

PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR

REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE

CASES, INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION,

DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR

EXEMPLARY, ARISING OUT OF OR RELATING TO THE

PRODUCT;

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY

INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE

USER;

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION

OF THE PRODUCT BY THE USER;

(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES

ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE

INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;

(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE,

OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM

COMBINED BY THE DEVICES OF THIRD PARTY;

(6) ANY INCONVENIENCE, DAMAGES OR LOSSES RESULTING

FROM ACCIDENTS CAUSED BY AN INADEQUATE

INSTALLATION METHOD OR ANY FACTORS OTHER THAN A

DEFECT IN THE PRODUCT ITSELF;

(7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE;

(8) ANY DAMAGE OR CLAIMS DUE TO LOSS OR LEAKAGE OF

IMAGE DATA OR SETTING DATA SAVED ON THIS UNIT OR

PERSONAL COMPUTER.

„

„

Network security

This unit also has functions which are used when it is connected to a

network.

Using the unit when it is connected to a network may possibly give rise

to the following.

(1) Leakage or disclosure of information transmitted via this unit

(2) Unauthorized use of this unit by a third person with malicious

intent

(3) Interference or stoppage of this unit by a third person with

malicious intent

It is your responsibility to take sufficient network security measures such

as those described below to protect yourself against the above risks.

Panasonic does not accept any responsibility for damage of this type.

z

z

Use this unit in a network secured by a firewall, etc.

z

z

If this unit is used in a system with a personal computer connected,

make sure that checks for and removal of computer viruses and

malicious programs are implemented regularly.

Also observe the following points.

z

z

Do not install the unit in a location where the unit, cables, and other

parts may be easily damaged.

User authentication

In order to protect device settings from exposure on the network, when

connecting to a network, please enable user authentication to restrict

access as appropriate.

Restrictions on use

It is recommended that the remote operation panel and all devices to be

used with the remote operation panel be connected to the same network

segment.

Events related to settings of network devices may occur if devices are

connected to different segments, so verify operation carefully before

placing devices into service.

„

„

Upgrade software

You can obtain the upgrade software from Service and Support on the

following website.

https://pro‑av.panasonic.net/

For the upgrade procedure, refer to the instructions included with the

download file.

„

„

File types handled by the unit

Camera configuration

file

Configuration file data for the remote

cameras.

RP configuration file

Configuration file especially for AW‑RP60.

Advertising