Panasonic AW-RP60 Remote Camera Controller - Manual (Page 47)

47
Menu
(continued)
Item Initial setting Setting details
USER1 I.S. It is possible to allocate the following functions to the user buttons.
USER2 ND1 POWER OFF:
Power off function
ND1, ND2, ND3, ND4:
ND1 to ND4 functions
FREEZE.D:
Freeze during function
D.ZOOM:
Digital zoom function
D.EXT:
D.EXT (OFF/×1.4) function
D‑EXT×2.0:
D.EXT (OFF/×2.0) function
(This feature is available when connected to a camera
for business applications that is equipped with the
double digital extender function.)
CROP SW:
Crop SW On/Off function (This feature is available
when connected to a camera for business applications
that is equipped with the CROP function.)
C.OT YL, C.OT G, C.OT MG:
YL, G, MG selection in Crop Out (This feature is
available when connected to a camera for business
applications that is equipped with the CROP function.)
C.AJ YL, C.AJ G, C.AJ MG:
YL, G, MG selection in Crop Adjust (This feature is
available when connected to a camera for business
applications that is equipped with the CROP function.)
C.MK YL, C.MK G, C.MK MG:
YL, G, MG selection in Crop Marker (This feature is
available when connected to a camera for business
applications that is equipped with the CROP function.)
WIPER:
Wiper selection (This feature is available when
connected to a camera for business applications that is
equipped with the WIPER function.)
D. HAZE:
D.HAZE CLR SW On/Off function (This feature is
available when connected to a camera for business
applications that is equipped with the D.HAZE function.)
DEFROSTER:
Defroster On/Off function (This feature is available
when connected to a camera for business applications
that is equipped with the DEFROSTER function.)
HEATER:
Heater On/Off function (This feature is available when
connected to a camera for business applications that is
equipped with the HEATER function.)
FAN:
Fan On/Off function
WASHER:
Washer On/Off function (This feature is available when
connected to a camera for business applications that is
equipped with the WASHER function.)
CAM LOCK:
CAM LOCK setting/cancel function (This feature is
available when connected to a camera for business
applications that is equipped with the CAM LOCK
function.)
TRACKING:
Tracking On/Off function
TR CNCT:
TR CONNECT On/Off function
SCENE1, SCENE2, SCENE3, SCENE4:
SCENE1 to SCENE4 allocation
SHOOTING:
Shooting mode (NORMAL/H.SENSE) function (This
feature is available when connected to a camera
for business applications that is equipped with the
SHOOTING function.)
I.S. :
Camera I.S. function ON/OFF
I.S.Ext :
Use this to enable the second setting level when there
is a setting value for a second level on a camera for
business applications, rather than an ON/OFF setting
for the function.
Refer to the operating instructions for the models that
support this.
USER3 ND2
USER4 ND3
USER5 ND4
USER6 D.EXT
USER7 D.ZOOM
USER8 FREEZE.D