Panasonic AW-RP60 Remote Camera Controller - Manual (Page 70)

70
Menu
(continued)
„ „ AUTO IP SET
AUTO IP SET 1/1
AUTO SET
RENEW NON
TOTAL EXEC NEW
AW-UE70
0 0
___ indicates factory default settings.
Item Setting value Setting details
AUTO SET NON
RENEW
KEEP
NON:
No search is made for remote cameras.
RENEW:
The unit first searches within the same subnet. After this, each detected remote camera is
allocated a camera number in order.
At this time, each remote camera IP address is overwritten with the connection destination IP
address value set for each camera number in the unit.
KEEP:
The unit first searches within the same subnet.
After this, newly detected remote cameras are linked with camera numbers whose connection type
is set as [NON] on this unit.
At this time, the IP addresses set for the remote cameras are saved as they are and the connection
destination IP addresses set in this unit are overwritten.
NEW 0 The number of newly detected cameras is displayed.
TOTAL 0 The number of all devices currently being managed by the unit + Number of newly detected devices
is displayed.
EXEC NON
RETRY
SETTING
NON:
IP address setting operation is not performed.
RETRY:
Execute the [RENEW] or [KEEP] process again.
SETTING:
The results of [RENEW] or [KEEP] are reflected.
With [RENEW], the IP on the camera is also changed at this time.
z z Refer to “Setting the IP addresses automatically (auto IP setting)” (page 30) for details.