Ptz info1 1/1 – Panasonic AW-RP60 Remote Camera Controller User Manual
Page 49
49
Menu
(continued)
PTZ INFO1
z
The setting values and available setting items depend on the connected camera.
PTZ INFO1 1/1
SPEED
WTH Z
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1
STNDRD
FREEZE
ZOOM
MIN SPD
LIMIT
UP
LIMIT
LEFT
LIMIT
RIGHT
LIMIT
DOWN
P/T
CURVE
FOCUS/
IRIS
AW-UE70
Item
Setting details
SPEED WTH Z
Enable (ON) or disable (OFF) the function used to adjust the pan‑tilt adjustment speed in conjunction with the zoom
magnification.
When [ON] is set, the panning and tilting operations will become slower in the zoom status.
ZOOM MIN SPD
Calibrate the amount of zoom control sent from the unit so that lens zooming starts smoothly when the ZOOM button is
pressed in slowly.
Watch the images on the monitor to see if lens zooming starts smoothly when the ZOOM button is pressed in slowly.
Calibration starts at [1], the least amount, to [8], the most.
There is no calibration when [OFF] is selected.
FREEZE
Enable (ON) or disable (OFF) the function for freezing images during preset playback.
When this is set to [ON], preset playback is performed with a still of the image immediately preceding the start of preset
playback being output. The image freeze is released when preset playback is finished.
LIMIT UP
You can set the limiter of the remote camera in the direction of the upper limit from this unit.
LIMIT DOWN
You can set the limiter of the remote camera in the direction of the lower limit from this unit.
LIMIT LEFT
You can set the limiter of the remote camera in the direction of the left limit from this unit.
LIMIT RIGHT
You can set the limiter of the remote camera in the direction of the right limit from this unit.
P/T CURVE
You can adjust the relationship between the angle and
operation speed when the PAN/TILT lever is tilted.
FOCUS/IRIS
You can switch the operations of the FOCUS dial and the IRIS dial.
EXCHANGE:
Switches the operations of the FOCUS dial and the IRIS dial.
The operations of the auto focus button and the auto iris button are also switched when [EXCHANGE] is selected.
z
The one‑touch auto focus button is disabled.
z
Operation of the FOCUS SPEED dial is disabled.
z
Speed is fixed to the setting it was at the time the setting is changed to [EXCHANGE].
STANDARD:
Reverts the operations of the FOCUS dial and the IRIS dial.
P/T CURV=1
P/T CURV=5
Operating speed
Angle of lever