Connections – Panasonic AW-RP60 Remote Camera Controller User Manual
Page 16
16
IP connections for multiple units and remote cameras
AW‑UE70
AW‑UE70 *
1
PoE+ supported switching hub or
PoE+ injector *
2
LAN cables
(Straight cable or cross cable)
Max. 100 m (328 ft)
Remote camera controller
AW‑RP60
Remote camera controller
AW‑RP60
Remote camera controller
AW‑RP60
Remote camera controller
AW‑RP60
Remote camera controller
AW‑RP60
External DC
power supply
External DC
power supply
External DC
power supply
External DC
power supply
External DC
power supply
AC adaptor
*1: The AC adaptor is not shown in the above figure.
*2: Power can also be supplied to the AW‑RP60 from a PoE supported switching hub, PoE injector, PoE+ supported switching hub, or PoE+
injector.
z
Use a category 5e cable for the LAN cable.
z
One remote camera can be simultaneously controlled from up to 5 units. (When IP connection)
IP connection for one unit and one remote camera
AW‑UE70
LAN cable (Cross cable)
Max. 100 m (328 ft)
Remote camera controller
AW‑RP60
External DC
power supply
AC adaptor
z
Use a cross cable (category 5e cable) for the LAN cable.
z
When connecting to any camera other than an AW‑UE70, refer to the operating instructions for the camera.
Connections
(continued)