Rp initialize 1/1, Init all no? no? init aw-ue70 – Panasonic AW-RP60 Remote Camera Controller User Manual
Page 54
54
Menu
(continued)
Item
Setting value
Setting details
MENU BT MODE
PMEM OFF
PMEM ON
You can enable or disable the PMEM button when the MENU button on the LCD panel is set to ON.
PMEM OFF:
This disables the PMEM function when MENU is set to ON and is used for the button to select the
menu in the first layer.
PMEM ON:
This enables the PMEM function when MENU is set to ON and cannot be used for the button to
select menu in the first layer.
PC_TOOL LINK
DISABLE
ENABLE
Select [ENABLE] when using Setup Software.
z
z
If you change the item using the F5 dial, this setting will return to [DISABLE]. Do not turn the F5
dial after [ENABLE] is set.
NEW ID
Use this to create a new ID.
The ID can be 8‑16 alphanumeric characters long.
If the ID is not registered, the item name is displayed in red.
Turn the F1 dial to select a single character. Press the F1 dial to set each character and enter the
following values. Use the F2 dial to delete a single character.
This unit is initialized when [INIT ALL] is executed in the RP INITIALIZE menu and will return to an
unregistered state.
OLD ID
Displays the ID before the change.
Turn the F3 dial to select a single character. Press the F3 dial to set each character and enter the
following values. Use the F4 dial to delete a single character.
NEW PASSWORD
Use this to set a new password.
The password can be 8‑16 alphanumeric characters long. You can use the following characters and
symbols. (Use a combination of the three types, alphabetical characters, numerical characters, and
symbols, to set the password. You cannot set the same ID character string.)
z
z
A to Z, a to z, 0 to 9
z
z
~!@#$%^&*()_+\|{}[]<>.,/?'
If the password is not registered, the item name is displayed in red.
Turn the F1 dial to select a single character. Press the F1 dial to set each character and enter the
following values. Use the F2 dial to delete a single character.
This unit is initialized when [INIT ALL] is executed in the RP INITIALIZE menu and will return to an
unregistered state.
OLD PASSWORD
Displays the password before the change.
Turn the F3 dial to select a single character. Press the F3 dial to set each character and enter the
following values. Use the F4 dial to delete a single character.
Retype PASSWORD
Enter the password again.
Turn the F1 dial to select a single character. Press the F1 dial to set each character and enter the
following values. Use the F2 dial to delete a single character.
SAVE
No?
Yes
Turn the F4 dial to select [Yes] and press the F4 dial. When pressing the F4 dial, the ID and password
you have entered will be saved.
z
z
Settings are not updated until [SAVE] is executed after the settings are changed.
RP INITIALIZE
RP INITIALIZE 1/1
INIT
ALL
NO?
NO?
INIT
AW-UE70
___ indicates factory default settings.
Item
Setting value
Setting details
INIT ALL
NO?
YES?
Return all settings managed by this unit, including network settings, to the factory default conditions.
INIT
NO?
YES?
Return all settings managed by this unit, excluding network settings, to the factory default conditions.
z
z
The account information for this unit is not initialized.