Panasonic AW-RP60 Remote Camera Controller - Manual (Page 86)

86
Control interface for external devices
1. TALLY/GPIO (JST: JBY‑25S‑1A3F(LF)(SN))
Select [MAINTENANCE] > [RP SETTING] > [GPIO MODE], then you can assign MODE1 or MODE2 to the settings.
13 1
25 14
Pin number Signal name
Description of signal
MODE1 MODE2
1 DSU_GPIO_1 R_TALLY_IN1 CAM_SEL_IN1
14 DSU_GPIO_2 R_TALLY_IN2 CAM_SEL_IN2
2 DSU_GPIO_3 R_TALLY_IN3 CAM_SEL_IN3
15 DSU_GPIO_4 R_TALLY_IN4 CAM_SEL_IN4
3 DSU_GPIO_5 R_TALLY_IN5 CAM_SEL_IN5
16 DSU_GPIO_6 G_TALLY_IN1 CAM_GRP_SEL OUT1
4 DSU_GPIO_7 G_TALLY_IN2 CAM_GRP_SEL OUT2
17 DSU_GPIO_8 G_TALLY_IN3 CAM_GRP_SEL OUT3
5 DSU_GPIO_9 G_TALLY_IN4 CAM_GRP_SEL OUT4
18 DSU_GPIO_10 G_TALLY_IN5 CAM_GRP_SEL OUT5
6 DSU_GPIO_11 PMEM_GROUP_IN1 CAM_GRP_SEL OUT6
19 DSU_GPIO_12 PMEM_GROUP_IN2 CAM_GRP_SEL OUT7
7 DSU_GPIO_13 PMEM_GROUP_IN3 CAM_GRP_SEL OUT8
20 DSU_GPIO_14 PMEM_GROUP_IN4 PMEM_SEL_IN1
8 DSU_GPIO_15 PMEM_SEL_IN2
21 DSU_GPIO_16 CAM_SEL_OUT1 PMEM_SEL_IN3
9 DSU_GPIO_17 CAM_SEL_OUT2 PMEM_SEL_IN4
22 DSU_GPIO_18 CAM_SEL_OUT3 PMEM_SEL_IN5
10 DSU_GPIO_19 CAM_SEL_OUT4 PMEM_SEL_IN6
23 DSU_GPIO_20 CAM_SEL_OUT5 PMEM_SEL_IN7
11 DSU_GPIO_21 PMEM_SEL_IN8
24 DSU_GPIO_22 PMEM_SEL_IN9
12 DSU_GPIO_23 PMEM_SEL_IN10
25 GND GND GND
13 DSU_GPIO_24 ALARM_OUT ALARM_OUT
GND
GPI OUT
Example of GPI OUT connection
Ensure that the conditions given below
are satisfied.
Withstand voltage: Max. 24 V DC
Current: Max. 10 mA
AW‑RP60
(Max. current 10 mA)
(Max. voltage 24 V)
Example of TALLY IN and GPI IN connections
Provide contact inputs.
GND
GPI IN
TALLY IN
+3.3 V
AW‑RP60