Panasonic AW-RP60 Remote Camera Controller - Manual (Page 53)

53
Menu
(continued)
MAINTENANCE
⇒ “RP SETTING” (page 53)
⇒ “RP INITIALIZE” (page 54)
⇒ “RP VERSION” (page 55)
⇒ “GPI TALLY” (page 56)
⇒ “GPIO CAM SEL” (page 57)
⇒ “GPO CAM.G” (page 59)
⇒ “GPI PMEM” (page 60)
⇒ “GPI PMEM.G” (page 61)
„ „
RP SETTING
RP SETTING 1/2
LCD
BRIGHT
MODE1 PMEM OFF
DISABLE
BUZZER
LED
BRIGHT
GPIO
MODE
MENU BT
MODE
PC_TOOL
LINK
AW-UE70
10 ３ ON
RP SETTING 2/2
ID
SAVE
AW-UE70
NEW ID OLD ID
NEW PASSWORD OLD PASSWORD
Retype PASSWORD SAVE
No?
___ indicates factory default settings.
Item Setting value Setting details
LCD BRIGHT 1
⁞
10
Sets the brightness of the LCD panel.
LED BRIGHT 1
⁞
3
⁞
10
Set the brightness of the panel buttons.
BUZZER OFF
ON
Enable (ON) or disable (OFF) the buzzer (beep).
GPIO MODE MODE1
MODE2
You can select control of the port of the TALLY/GPIO connector.
For details, refer to “Control interface for external devices” (page 86).