Panasonic AW-RP60 Remote Camera Controller - Manual (Page 77)

77
Setup Software (continued)
Displaying the [Preset Name] tab
You can set a name of up to 8 characters for a preset number.
3 4 5
1
2
1 Camera number
Select the camera number for which settings are to be edited.
2 Setting area for PRESET names
Set a name for each PRESET number.
When [LOAD] is used to load a file, the name at the time of saving is displayed.
Names can be a maximum of 8 characters.
The following characters can be displayed.
Half‑size numeric characters 0123456789
Half‑size alphabetical characters
(upper and lower cases)
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
Symbols ‑ . _ , + / ( ) [ ] (and spaces)
3 REFRESH button
Displays the name set in the unit on the [Preset Name] screen.
4 CLEAR button
Cancels the settings.
5 SET button
Reflects the set data to AW‑RP60.